 |
| • |
The red lamp will light up when
touched. |
| • |
Can be used vertically or horizontally. |
| • |
Height 2" or 50mm (adjustable)
with magnetic base. |
| • |
Accuracy .0002" (.oo5mm). |
How to use the ZOP Z-axial preset gauge
| 1. |
Test for height of unit with
preset gauge and gauge block, adjust if needed with pre-set allen
screw on the side of the unit. |
| 2. |
Do not use calipers for presetting
unit, only use gauge block. |
| 3. |
Introduce the tool to the unit
until light is on, then draw back until the light is off. |
| 4. |
When presetting diameter, please
rotate tool slowly for higher precision. |
|
