Techniks Perske DIN 6388 Collets

 

These collets and collet nuts conform to DIN 6388 standards and are popular in the woodworking industry on Perske Motor Spindles.

Snap collet into the nut before screwing nut onto spindle or collet holder.

Left hand collet nuts available upon request.

 

Collet Dimensions:

Dimension EOC 08 SYOZ 20 EOC 16 SYOZ 25
Length 26mm 34mm 40mm 52mm
Outside Dia. 14.4mm 20mm 25.5mm 35mm

 

Collet Nut Dimensions:

Dimension EOC 08 SYOZ 20 EOC 16 SYOZ 25
Length 19mm 20mm 24mm 30mm
Outside Dia. 30mm 35mm 43mm 60mm

 

Available Sizes and Part Numbers:

Shank Diameter EOC 08 SYOZ 20 EOC 16 SYOZ 25
1/8" 03508-1/8 03520-1/8 03531-1/8 03868-1/8
3/16" 03508-3/16 03520-3/16 03531-3/16 03868-3/16
1/4" 03508-1/4 03520-1/4 03531-1/4 03868-1/4
5/16" 03508-5/16 03520-5/16 03531-5/16 03868-5/16
3/8"   03520-3/8 03531-3/8 03868-3/8
7/16"   03520-7/16 03531-7/16 03868-7/16
1/2"   03520-1/2 03531-1/2 03868-1/2
9/16"     03531-9/16 03868-9/16
5/8"     03531-5/8 03868-5/8
3/4"       03868-3/4
7/8"       03868-7/8
1"       03868-1
10mm     03531-10 03868-10
16mm     03531-16 03868-16
20mm       03868-20
25mm       03868-25

 

Nuts and Wrenches:

Description EOC 08 SYOZ 20 EOC 16 SYOZ 25
Nut 03508 03520 03636 03638
Wrench   22220   03691