A. Magnetic Media: Stainless Steel Pin
(sus304 with magnetic treatment)
| • |
Larger pins make the deburring power stronger. Choose
larger pins for harder material. Hard material such as
stainless steel, steel...etc, should use a diameter of
stainless pin bigger than 0.5mm. For soft material such
as brass, copper, aluminum or gold, choose a diameter
of stainless pins smaller than 0.5mm. The power can be
adjusted by the speed of the motor. |
| • |
3mm stainless pins will work better for small holes
and crevices. |
| • |
When deburring small holes, choose
the diameter of stainless pin smaller than the hole. |
| • |
The stainless pins are hardened to HRC 30, increasing
durability and eliminating high media costs. |
B. Deburring Solution PFS-747
The function of liquid PFS-747: Prevent rust,
polishing, colling and cleaning.
Can also be used with steel and iron.
IF the temperature reaches 158F, the liquid must
be changed or added. Heat will make the water evaporate.
C. Machining Base, Plastic Container
For
all kinds of material. (Dilute with water for 50-100 times.)
