Metal Removal

Metal Removal Solid Carbide End Mills


General Purpose Single End Multi-Flute

All end mills are RH cut, RH helix, 30° helix angle, center cutting
Series Length # of Flutes End Geometry Coating Notes Application
CG-4 Regular 4 Square Uncoated and specific sizes of TiN coated, TiCN coated and TiAlN coated standard; others available as a modification  

Most commonly used in profiling and finishing applications.

Stiffer construction results in minimal deflection

Four flutes provide good wear resistance for excellent size control.

CG-4R Regular 4 Square with corner radius Uncoated and TiN coated standard; others available as a modification Corner radius provides stronger corners in applications where corner chipping may be a concern.

Most commonly used in profiling and finishing applications that require radius finish in the workpiece.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

CG-4M (standard metric)

CG-4MD (DIN metric)

Regular 4 Square Uncoated standard; coated tools available as a modification  

Most commonly used in profiling and finishing applications where metric sizes are required.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

CPNC-4 Regular 4 Square Uncoated standard; coated tools available as a modification Plus tolerances

Most commonly used in profiling and finishing applications; however, the cutter diameter tolerance is on the plus side for use in tight tolerance applications.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistant characteristics for excellent size control.

CG-4B Regular 4 Ball Uncoated and specific sizes TiCN coated and TiAlN coated standard; other coatings and sizes available as a modification  

Most commonly used in profiling and finishing applications where a ball nose geometry is required.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

Excellent for plunging, profiling, and heavy peripheral cuts.

Ideal for contouring operations.

CG-4MB (standard metric)

CG-4MDB (DIN metric)

Regular 4 Ball Uncoated standard; coated tools available as a modification

Weldon flats on shanks

Most commonly used in profiling and finishing applications where metric ball-nose geometry is required.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

Excellent for plunging, profiling and heavy peripheral cuts.

Ideal for contouring operations.

CGL-4 Regular 4 Square Uncoated and TiCN coated standard; others available as a modification Long shank

Most commonly used in profiling and finishing applications where a longer shank is required.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

Excellent for plunging, profiling and heavy peripheral cuts.

Ideal for contouring operations.

CGL-4B Regular 4 Ball Uncoated and TiCN coated standard; others available as a modification Long shank

Most commonly used in profiling and finishing applications where a longer shank is required.

Stiffer construction results in minimal deflection.

Four flutes provide good wear resistance for excellent size control.

Excellent for plunging, profiling and heavy peripheral cuts.

Ideal for contouring operations.

CG-6 Regular 6 Square Uncoated, and specific sizes TiCN coated and TiAlN coated standard; other coatings and sizes available as a modification  

6-flute end mills are excellent for harder materials and higher feeds and speeds.

Excellent for finishing operations.