Metal Removal

Metal Removal Solid Carbide End Mills

General Purpose Single End 2-Flute

All end mills are RH cut, RH helix, 30° helix angle, center cutting
Series Length End Geometry Coating Notes Application
CGM-2 Miniature sizes Square Uncoated (coating available as mod) Miniature sizes

Designed for precision slotting applications.

Provides adequate core strength and sufficient flute volume for milling small slots.

CG-2 Regular Square Uncoated and TiCN coated standard in all sizes; TiN coated and TiAlN coated standard in specific sizes; other sizes available as a modification Large flute area enables excellent chip evacuation

Effective for general milling applications in cast iron, non-ferrous light metals and plastics.

Excellent for plunging, slotting, and heavy peripheral cuts.

CG-2M (standard metric)

CG-2MD (DIN metric)

Regular Square Uncoated standard; coatings available as a modification Large flute area enables excellent chip evacuation

Effective for general milling applications in cast iron, non-ferrous light metals, and plastics

Excellent for plunging, slotting, and heavy peripheral cuts.

CG-2R Regular Square with corner radius Uncoated and TiCN coated standard; others available as special Corner radius provides stronger corners in applications where corner chipping may be a concern.

Effective for general milling applications in cast iron, non-ferrous light metals and plastics, but with corner radius for applications that require it.

Excellent for plunging, slotting and heavy peripheral cuts.

CPNC-2 Regular Square Uncoated standard; coatings available as a modification   Machining characteristics are similar to the CG-2 series; however, the cutter diameter tolerance is on the plus side for use in tight tolerance applications.
CG-2B Regular Ball Uncoated and TiCN coated standard in all sizes; TiAlN coated standard in specific sizes; others available as a modification  

Effective for general milling applications in cast iron, non-ferrous light metals, and plastics, but use whenever a ball-nose geometry is required

Excellent for plunging, slotting, and heavy peripheral cuts.

Also ideal for contouring operations.

CG-2MB (standard metric)

CG-2MDB (DIN metric)

Regular Ball Uncoated standard; coated tools available as a modification  

Effective for general milling applications in cast iron, non-ferrous light metals, and plastics, but use whenever a ball-nose geometry or metric sizes are required

Excellent for plunging, slotting, and heavy peripheral cuts.

Also ideal for contouring operations.

CGL-2 Regular Square Uncoated, TiCN coated, and TiAlN coated standard; others available as a modification  

Effective for general milling applications in cast iron, non-ferrous light metals, and plastics

Excellent for plunging, slotting, and heavy peripheral cuts in long-reach applications with more rigidity than a long-length end mill.

CGL-2B Regular Ball Uncoated, TiCN coated, and TiAlN coated standard; others available as a modification  

Effective for general milling applications in cast iron, non-ferrous light metals, and plastics

Excellent for plunging, slotting, and heavy peripheral cuts in long-reach applications with more rigidity than a long-length end mill.