Metal Removal

Metal Removal Solid Carbide End Mills


General Purpose Double End 2-Flute

All end mills are RH cut, RH helix, 30° helix angle, center cutting

Series Length End Geometry Coating Notes Application
CGDS-2 Stub Square Uncoated standard; coated tools available as a modification  

Suitable for shallow slotting applications.

Use where precision finishing and sizing are required.

Stub lengths offer rigidity and reduce deflection.

CGDS-2B Stub Ball Uncoated standard; coated tools available as a modification  

Suitable for shallow slotting applications.

Use where precision finishing and sizing are required.

Stub lengths offer rigidity and reduce deflection.

CGD-2 Regular Square Uncoated and TiCN coated standard; other coatings available as a modification Weldon flat on shank

General-purpose double-end end mill comparable in performance to Series CG-2 end mills, but with additional tool life per tool.

Designed with large flute area for maximum chip clearance.

Use to plunge, slot, and take heavy peripheral cuts.

Use where precision finishing and sizing are required.

CGD-2B Regular Ball Uncoated and TiCN coated standard; other coatings available as a modification Weldon flat on shank

General-purpose double-end end mill comparable in performance to Series CG-2 end mills, but with additional tool life per tool.

Designed with large flute area for maximum chip clearance.

Use to plunge, slot, and take heavy peripheral cuts.

Use where precision finishing and sizing are required.