|
Accu-Tapper
What Users Say
T & M Machine (job
shop in Vancouver, WA)
As more jobs came through the shop, tapping became a
major problem. "In the past, we did most of our work on tapping heads
with drill presses. But some of our parts needed closer tolerances, and
we found that the heads were not accurate enough," Creley reports.
[more...]
Fabmark Industrial Product
(Hillsboro, OR)
Fabmark Industrial Product of Hillsboro, OR knew how
costly and time consuming a tapping operation can be. Before learning
about the Accu-Tapper power tapping machine, Fabmark did a majority of
its tapping on a drill press with a tapping head, explained production
manager Gary Owen. Owen said the Accu-Tapper is a labor saver, cutting
his tapping time almost in half. [more...]
American Bronze (foundry
/ faucet manufacturer)
Lowe was looking for a low dollar tapping machine that
wouldn't require fixtured parts, and discovered that Lite Specialty Metal
Works, Inc. of Tualain, OR made exactly the machine they needed. Now,
after about 45,000 holes, Lowe says, "We are producing 1,000 faucet
animals per week, and in each run of 1,000 we've cut 26 hours of production
time using the Accu-Tapper... [more...]
|
